resistor tubesTubular Resistors are available in a wide assortment of diameters and lengths to meet your application needs. Standard applications include high power loads, snubber circuit RF power amplifiers, impulse voltage generators, high voltage circuits and power supplies, X-ray equipment, and dummy loads. The ceramic composition tubes perform well where high peak power or high energy pulses are required to be handled. These non-inductive resistors are able to dissipate the energy uniformly through the entire resistor body.

Download Tubular Resistors Specifications

 

Part
Number
Diameter
(Inches)
I.D.
(Inches)
Length*
(Inches)
Low
(Ohms)
High
(Ohms)
Peak
Power
(Watts)
Peak
Energy
(Joules)
Peak
Voltage
(Maximum)
83-TD02A
Tubular Resistors
0.750 0.25 2 4.2 20,300 9.4 3,770 10,000
83-TD04A
Tubular Resistors
0.750 0.25 4 8.2 40,700 18.8 7,540 20,000
83-TD06A
Tubular Resistors
0.750 0.25 6 12.4 61,100 28.3 11,310 40,000
83-TD08A
Tubular Resistors
0.750 0.25 8 16.5 81,400 37.7 15,080 60,000
83-TD10A
Tubular Resistors
0.750 0.25 10 20.5 101,800 47.1 18,850 80,000
83-TD12A
Tubular Resistors
0.750 0.25 12 24.6 122,200 56.5 22,620 100,000

 

Part
Number
Diameter
(Inches)
I.D.
(Inches)
Length*
(Inches)
Low
(Ohms)
High
(Ohms)
Peak
Power
(Watts)
Peak
Energy
(Joules)
Peak
Voltage
(Maximum)
83-TE02C
Tubular Resistors
1.000 0.48 2 3.0 13,500 14.0 5,600 10,000
83-TE04C
Tubular Resistors
1.000 0.48 4 6.0 27,000 28.0 11,300 20,000
83-TE06C
Tubular Resistors
1.000 0.48 6 9.0 40,000 42.0 16,900 40,000
83-TE08C
Tubular Resistors
1.000 0.48 8 11.0 54,000 56.0 22,600 60,000
83-TE10C
Tubular Resistors
1.000 0.48 10 14.0 67,000 70.0 28,200 80,000
83-TE12C
Tubular Resistors
1.000 0.48 12 17.0 81,000 84.0 33,900 100,000
83-TE14C
Tubular Resistors
1.000 0.48 14 20.0 95,000 99.0 39,500 120,000
83-TE16C
Tubular Resistors
1.000 0.48 16 22.0 108,000 113.0 45,200 140,000
83-TE18C
Tubular Resistors
1.000 0.48 18 25.0 122,000 127.0 50,800 160,000

* Other length’s available upon request

Part Number plus the Resistance Code is used for specifying a particular part. The Resistance code is defined by the first two numbers of the resistance value, followed by a single number multiplier, and the resistance tolerance (20% is L, 10% is K, 5% is J). When the resistance is less than 10 ohms, the multiplier is not used and replaced by an “R”.

For example a 0.50” x 0.220” X 6.0” Resistor Tube at 50 ohms +/-10% would be qualified as 83-TC06A-500K, and a 0.750” x 0.25” X 10.0 Resistor Tube at 12,000 ohms +/-20% would be 83-TD10A-123L.

 

Part
Number
Diameter
(Inches)
I.D.
(Inches)
Length*
(Inches)
Low
(Ohms)
High
(Ohms)
Peak
Power
(Watts)
Peak
Energy
(Joules)
Peak
Voltage
(Maximum)
83-TF02E
Tubular Resistors
1.500 0.50 2 2.0 5,000 36.0 14,000 10,000
83-TF04E
Tubular Resistors
1.500 0.50 4 3.0 10,000 75.0 28,000 20,000
83-TF06E
Tubular Resistors
1.500 0.50 6 4.0 15,000 110.0 42,000 40,000
83-TF08E
Tubular Resistors
1.500 0.50 8 5.0 20,000 150.0 56,000 60,000
83-TF10E
Tubular Resistors
1.500 0.50 10 6.0 25,000 180.0 70,000 80,000
83-TF12E
Tubular Resistors
1.500 0.50 12 7.0 30,000 220.0 85,000 100,000
83-TF14E
Tubular Resistors
1.500 0.50 14 8.0 35,000 260.0 100,000 120,000
83-TF16E
Tubular Resistors
1.500 0.50 16 9.0 40,000 300.0 114,000 140,000
83-TF18E
Tubular Resistors
1.500 0.50 18 10.0 45,000 330.0 128,000 160,000

 

Part
Number
Diameter
(Inches)
I.D.
(Inches)
Length*
(Inches)
Low
(Ohms)
High
(Ohms)
Peak
Power
(Watts)
Peak
Energy
(Joules)
Peak
Voltage
(Maximum)
83-TG02C
Tubular Resistors
1.625 0.50 2 1.0 4,200 45.0 18,000 10,000
83-TG04C
Tubular Resistors
1.625 0.50 4 2.0 8,500 90.0 36,000 20,000
83-TG06C
Tubular Resistors
1.625 0.50 6 3.0 12,000 135.0 54,000 40,000
83-TG08C
Tubular Resistors
1.625 0.50 8 4.0 17,000 180.0 72,000 60,000
83-TG10C
Tubular Resistors
1.625 0.50 10 5.0 21,000 225.0 90,000 80,000
83-TG12C
Tubular Resistors
1.625 0.50 12 6.0 25,000 270.0 108,000 100,000
83-TG14C
Tubular Resistors
1.625 0.50 14 7.0 29,000 315.0 126,000 120,000
83-TG16C
Tubular Resistors
1.625 0.50 16 8.0 34,000 360.0 144,000 140,000
83-TG18C
Tubular Resistors
1.625 0.50 18 9.0 38,000 405.0 162,000 160,000

* Other length’s available upon request

Part Number plus the Resistance Code is used for specifying a particular part. The Resistance code is defined by the first two numbers of the resistance value, followed by a single number multiplier, and the resistance tolerance (20% is L, 10% is K, 5% is J). When the resistance is less than 10 ohms, the multiplier is not used and replaced by an “R”.

For example a 1.5” x 1.0” X 8.0” Resistor Tube at 7.5 ohms +/-10% would be qualified as 83-TF08E-7R5K, and a 1.5” x 1.0” X 16.0 Resistor Tube at 50,000 ohms +/-20% would be 83-TF16E-503L.

 

Part
Number
Diameter
(Inches)
I.D.
(Inches)
Length*
(Inches)
Low
(Ohms)
High
(Ohms)
Peak
Power
(Watts)
Peak
Energy
(Joules)
Peak
Voltage
(Maximum)
83-TC02A
Tubular Resistors
0.505 0.22 2 9.9 49,297 12.0 1,400 5,000
83-TC04A
Tubular Resistors
0.505 0.22 4 19.7 98,593 24.0 2,800 20,000
83-TC06A
Tubular Resistors
0.505 0.22 6 29.6 147,890 36.0 4,200 40,000
83-TC08A
Tubular Resistors
0.505 0.22 8 39.4 197,186 48.0 5,600 60,000
83-TC10A
Tubular Resistors
0.505 0.22 10 49.3 246,483 60.0 7,000 80,000
83-TC12A
Tubular Resistors
0.505 0.22 12 59.2 295,779 72.0 8,400 95,000

 

Part
Number
Diameter
(Inches)
I.D.
(Inches)
Length*
(Inches)
Low
(Ohms)
High
(Ohms)
Peak
Power
(Watts)
Peak
Energy
(Joules)
Peak
Voltage
(Maximum)
83-TD02C
Tubular Resistors
0.750 0.50 2 6.5 32,595 12.0 2,000 5,000
83-TD04C
Tubular Resistors
0.750 0.50 4 13.0 65,190 24.0 4,000 20,000
83-TD06C
Tubular Resistors
0.750 0.50 6 19.6 97,785 36.0 6,000 40,000
83-TD08C
Tubular Resistors
0.750 0.50 8 26.1 130,379 48.0 8,000 60,000
83-TD10C
Tubular Resistors
0.750 0.50 10 32.6 162,974 60.0 10,000 80,000
83-TD12C
Tubular Resistors
0.750 0.50 12 39.1 195,569 72.0 12,000 95,000

* Other length’s available upon request

Part Number plus the Resistance Code is used for specifying a particular part. The Resistance code is defined by the first two numbers of the resistance value, followed by a single number multiplier, and the resistance tolerance (20% is L, 10% is K, 5% is J). When the resistance is less than 10 ohms, the multiplier is not used and replaced by an “R”.

For example a 1.0” x 0.50” X 6.0” Resistor Tube at 150 ohms +/-10% would be qualified as 83-TE06C-151K, and a 1.0” x 0.75” X 16.0 Resistor Tube at 5,000 ohms +/-20% would be 83-TE16D-502L.

 

Part
Number
Diameter
(Inches)
I.D.
(Inches)
Length*
(Inches)
Low
(Ohms)
High
(Ohms)
Peak
Power
(Watts)
Peak
Energy
(Joules)
Peak
Voltage
(Maximum)
83-TE02D
Tubular Resistors
1.000 0.75 2 5.0 23,200 15.0 4,000 5,000
83-TE04D
Tubular Resistors
1.000 0.75 4 10.0 46,500 30.0 8,500 25,000
83-TE06D
Tubular Resistors
1.000 0.75 6 14.0 69,800 50.0 13,000 45,000
83-TE08D
Tubular Resistors
1.000 0.75 8 19.0 93,100 75.0 16,500 65,000
83-TE10D
Tubular Resistors
1.000 0.75 10 24.0 116,400 85.0 22,000 85,000
83-TE12D
Tubular Resistors
1.000 0.75 12 28.0 139,600 100.0 27,000 95,000
83-TE14D
Tubular Resistors
1.000 0.75 14 33.0 162,900 115.0 33,400 110,000
83-TE16D
Tubular Resistors
1.000 0.75 16 38.0 186,200 130.0 38,000 130,000
83-TE18D
Tubular Resistors
1.000 0.75 18 41.9 209,500 150.0 43,000 150,000

 

Part
Number
Diameter
(Inches)
I.D.
(Inches)
Length*
(Inches)
Low
(Ohms)
High
(Ohms)
Peak
Power
(Watts)
Peak
Energy
(Joules)
Peak
Voltage
(Maximum)
83-TF02E
Tubular Resistors
1.500 1.0 2 1.7 8,100 24.0 10,000 5,000
83-TF04E
Tubular Resistors
1.500 1.0 4 3.3 16,200 48.0 20,000 25,000
83-TF06E
Tubular Resistors
1.500 1.0 6 5.0 24,400 70.0 30,000 45,000
83-TF08E
Tubular Resistors
1.500 1.0 8 6.6 32,500 100.0 46,000 65,000
83-TF10E
Tubular Resistors
1.500 1.0 10 8.2 40,700 120.0 60,000 85,000
83-TF12E
Tubular Resistors
1.500 1.0 12 9.8 18,800 150.0 75,000 95,000
83-TF14E
Tubular Resistors
1.500 1.0 14 11.5 57,000 175.0 85,000 110,000
83-TF16E
Tubular Resistors
1.500 1.0 16 13.1 65,100 200.0 100,000 130,000
83-TF18E
Tubular Resistors
1.500 1.0 18 14.7 73,338 225.0 119,000 150,000

* Other length’s available upon request

Part Number plus the Resistance Code is used for specifying a particular part. The Resistance code is defined by the first two numbers of the resistance value, followed by a single number multiplier, and the resistance tolerance (20% is L, 10% is K, 5% is J). When the resistance is less than 10 ohms, the multiplier is not used and replaced by an “R”.

For example a 1.0” x 0.50” X 6.0” Resistor Tube at 150 ohms +/-10% would be qualified as 83-TE06C-151K, and a 1.0” x 0.75” X 16.0 Resistor Tube at 5,000 ohms +/-20% would be 83-TE16D-502L.

 

Part
Number
Diameter
(Inches)
I.D.
(Inches)
Length*
(Inches)
Low
(Ohms)
High
(Ohms)
Peak
Power
(Watts)
Peak
Energy
(Joules)
Peak
Voltage
(Maximum)
83-TG02D
Tubular Resistors
1.625 .75 2 1.0 4,800 39.0 15,000 5,000
83-TG04D
Tubular Resistors
1.625 .75 4 2.0 9,800 78.0 31,000 25,000
83-TG06D
Tubular Resistors
1.625 .75 6 3.0 14,000 117.0 47,000 45,000
83-TG08D
Tubular Resistors
1.625 .75 8 4.0 19,000 156.0 62,000 65,000
83-TG10D
Tubular Resistors
1.625 .75 10 5.0 24,000 195.0 78,000 85,000
83-TG12D
Tubular Resistors
1.625 .75 12 6.0 29,000 235.0 94,000 95,000
83-TG14D
Tubular Resistors
1.625 .75 14 7.0 34,000 274.0 109,000 110,000
83-TG16D
Tubular Resistors
1.625 .75 16 8.0 39,000 313.0 125,000 130,000
83-TG18D
Tubular Resistors
1.625 .75 18 9.0 44,000 352.0 141,000 150,000

 

Part
Number
Diameter
(Inches)
I.D.
(Inches)
Length*
(Inches)
Low
(Ohms)
High
(Ohms)
Peak
Power
(Watts)
Peak
Energy
(Joules)
Peak
Voltage
(Maximum)
83-TG02E
Tubular Resistors
1.625 1.0 2 2.0 6,000 30.0 12,000 5,000
83-TG04E
Tubular Resistors
1.625 1.0 4 3.0 12,000 61.0 24,000 25,000
83-TG06E
Tubular Resistors
1.625 1.0 6 4.0 18,000 92.0 37,000 45,000
83-TG08E
Tubular Resistors
1.625 1.0 8 6.0 24,000 123.0 49,000 65,000
83-TG10E
Tubular Resistors
1.625 1.0 10 7.0 31,000 154.0 61,000 85,000
83-TG12E
Tubular Resistors
1.625 1.0 12 8.0 37,000 185.0 74,000 95,000
83-TG14E
Tubular Resistors
1.625 1.0 14 9.0 43,000 216.0 86,000 110,000
83-TG16E
Tubular Resistors
1.625 1.0 16 11.0 49,000 247.0 98,000 130,000
83-TG18E
Tubular Resistors
1.625 1.0 18 12.0 55,000 278.0 111,000 150,000

* Other length’s available upon request

Part Number plus the Resistance Code is used for specifying a particular part. The Resistance code is defined by the first two numbers of the resistance value, followed by a single number multiplier, and the resistance tolerance (20% is L, 10% is K, 5% is J). When the resistance is less than 10 ohms, the multiplier is not used and replaced by an “R”.

For example a 1.0” x 0.50” X 6.0” Resistor Tube at 150 ohms +/-10% would be qualified as 83-TE06C-151K, and a 1.0” x 0.75” X 16.0 Resistor Tube at 5,000 ohms +/-20% would be 83-TE16D-502L.

US Resistor, Inc.

1016 DeLaum Road
St. Marys, PA 15857-1059
Phone: (814) 781-7679
Fax: (814) 834-9370